What's a Ecodiesel Delete Pipe?
An Ecodiesel Delete Pipe (specifically for the 3.0L V6 engines found in RAM 1500 and Jeep models) is a high-flow exhaust component designed to physically remove and replace the factory Diesel Particulate Filter (DPF) and Selective Catalytic Reduction (SCR) assembly.
Key Benefits of Installing a Ecodiesel Delete Pipe
- Reliability: Eliminate limp mode and emissions-related error codes for good.
- Better Cooling: Lower exhaust temperatures by removing restrictive factory filters.
- Engine Longevity: Stop soot recirculation to keep your oil clean and intake clear.
- Fuel Efficiency: End fuel-wasting regen cycles to maximize every tank of diesel.
- Performance: Experience faster turbo spooling and much sharper throttle response.
- Lower Maintenance: Say goodbye to DEF refills and expensive sensor repairs.
Ecodiesel Delete Pipe: Deleted vs. Stock
| Dimension |
Stock (Factory) |
Deleted (Upgraded) |
| Horsepower |
Factory rated at 240–260 HP; prone to power derating during frequent regen cycles. |
Increased; Safe gains of 30–75+ HP are common with a Stage 2 delete and proper tuning. |
| Fuel Economy |
Good; Avg. 24–28 MPG highway, but efficiency is lost during "Active Regeneration." |
Improved; Most owners report a gain of 2–5 MPG; high-speed cruising can reach 30+ MPG. |
| Maintenance Cost |
Very High; Requires regular DEF refills and frequent sensor replacements (NOx, EGT, and O2). |
Reduced; Eliminates the primary cause of roadside downtime and expensive DEF system repairs. |
| Reliability |
Moderate/Low; Clogged EGR coolers and DPF failures are the "Achilles' heel" of this engine. |
Significantly Enhanced; Prevents soot buildup in the intake and protects the engine from heat soak. |
| Exhaust Gas Temp |
High; The dense ceramic DPF traps intense heat near the turbo, increasing oil temperatures. |
Lower EGTs; High-flow pipes drop operating temperatures by 100–150°F, extending turbo life. |
| Legal Status |
Street Legal; EPA compliant. |
Off-Road / Competition Use Only. |
| Sound Profile |
Silent; The emissions equipment completely masks the diesel engine note. |
Refined; Unlocks a subtle, smooth V6 diesel growl and a soft turbo whistle. |
Ecodiesel Delete Pipe Models Year Fitment Guide
Choose the perfect Ecodiesel Delete Pipe by year to guarantee seamless fitment and performance. We offer delete pipes tailored to the exhaust configurations of the 3.0L EcoDiesel platform.
| Ecodiesel Delete Pipe |
Model Year |
Vehicle / Engine Generation |
Emissions Systems Equipped |
Common Issues |
Recommended Delete Pipe Setup |
| Ecodiesel Delete Pipe |
2014–2016 |
Ram 1500 / Jeep Gen 2 EcoDiesel |
EGR, DPF, DEF (SCR) |
Frequent regen cycles, DEF faults, sensor failures |
DPF + SCR Delete Pipe with supported tuning |
| 2017–2019 |
Ram 1500 Updated Gen 2 |
EGR, DPF, DEF (Updated ECU) |
Warning lights, regen downtime, DEF system issues |
Year-Specific Delete Pipe with compatible tuning |
| 2020–2021 |
Ram 1500 / Jeep Gen 3 EcoDiesel |
Advanced EGR, DPF, DEF, New ECU strategy |
Very limited tuning availability, ECM restrictions |
Vetted Delete Pipes for Supported Models Only |
Note: Every one of these Ecodiesel Delete Pipes require compatible tuning to prevent check engine from throwing codes or entering Limp Mode.
How to Install a Ecodiesel Delete Pipe
Installing an Ecodiesel Delete Pipe replaces the factory emissions exhaust section with a high-flow pipe to reduce exhaust restriction, lower exhaust gas temperatures (EGTs), and improve overall drivability. EcoDiesel platforms (Ram 1500 and Jeep EcoDiesel) use highly integrated emissions and ECU strategies, which makes tuning compatibility and preparation the most important part of the installation process.
Installation Steps
- ECU Preparation & Tuning: The process begins with** **ECU calibration using a supported tuning platform. This step disables emissions-related diagnostics and prevents warning lights or limp mode once factory components are removed.
- Factory Emissions Exhaust Removal: The factory exhaust section containing the DPF and SCR (DEF) components is unbolted and removed. Sensors such as EGT and NOx are disconnected or electronically disabled according to the tuning configuration.
- Delete Pipe Installation: The Ecodiesel Delete Pipe is installed in place of the factory emissions exhaust. These pipes are designed to align with factory hangers and provide proper clearance around the frame, transmission crossmember, and driveline.
- Sensor & Connection Verification: Any required sensor fittings or plugs are installed, and all clamps and connections are aligned and tightened to ensure a secure, leak-free exhaust system.
- System Check & Final Verification: After installation, the engine is started and inspected for exhaust leaks. The tuner is used to clear any remaining diagnostic codes and verify normal operation during a short test drive.
Note: Every EngineGo kit includes a comprehensive, model-specific guide to ensure your installation is seamless and your fitment is guaranteed. For technical deep-dives, step-by-step photos, and specific torque specs, you can find detailed information under the "Installation Guide" tab on every product page.
Why Choose EngineGo for Ecodiesel Delete Pipe
Choosing EngineGo means partnering with diesel performance experts. We back every build with technical support, ensuring your truck moves from the shop to the street with peak power and reliability.
15+ Years of Expert Support
In-House Specialists: Our team has over 15 years of hands-on experience in Ford Powerstroke, Cummins, and Duramax platforms..
Expert Guidance: We provide comprehensive support, from initial fitment questions to final tuning advice.
High-Performance Reliability
Built to Last: We pride ourselves on offering parts designed for maximum durability and long-term reliability.
Expertly Vetted: Every product is backed by our deep understanding of diesel engines.
A Seamless Shopping Experience
Free Shipping: Many of our kits include free shipping to get your project started without extra costs.
Money-Back Guarantee: Shop with confidence knowing your purchase is protected if you aren't satisfied.
Off-Road Use Disclaimer
Diesel delete kits are intended for off-road and competition-use vehicles only. These products are not legal for use on public roads and are sold strictly for non-emissions-controlled applications.
Always verify and comply with local, state, and federal regulations before purchase or installation.
FAQ
What does an Ecodiesel Delete Pipe do?
An Ecodiesel Delete Pipe improves exhaust flow by removing restrictive factory components, helping reduce backpressure and support performance tuning.
Do I need tuning with an Ecodiesel Delete Pipe?
In most cases, tuning is strongly recommended to ensure proper engine operation and maximize performance benefits.
Will an Ecodiesel Delete Pipe increase horsepower?
While results vary by setup, many users experience improved throttle response and horsepower gains when paired with proper tuning.
