Cat & Muffler Delete Pipe with Clamps for 2003-2007 F250/F350 6.0L Powerstroke

5.0/5.0 (6 Reviews)
Part #PDP0070AZZ

Cat & Muffler Delete Pipe with Clamps for 2003-2007 F250/F350 6.0L Powerstroke

5.0/5.0 (6 Reviews) Part #PDP0070AZZ
$169.99
Delete Tuner
With Mini Maxx V1 Tuner
Without Tuner
Cat & Muffler Delete Pipe
Included
EGR Delete Kit
Included
Save $15
Not Included
{{ customFieldErrors[field.field_code] }}
QTY:
Add to Wish List
EngineGo Summer Sale
  • Shipping:     Free shipping from warehouse in the US
  • Delivery:     Order handling: Same day or next day; Transit time: 3–5 days, excluding Sundays for both. See Details
  • Returns:     Money-back guarantee. See Details
  • Payments:
0
$169.99

Part Type Cat & Muffler Delete Pipe
Condition New
Pipe Diameter 3.5 Inch
Thickness 2 mm
Pipe Material T409 Stainless Steel  
Vehicle Fit Guide For 2003-2007 Ford F250/F350 with 6.0L Powerstroke Diesel

Features
  • Boost torque at high RPMs by reducing exhaust backpressure.
  • Increase fuel mileage significantly by minimizing exhaust system resistance, improving engine efficiency.
  • Eliminate the risk of catalytic converter malfunctions, avoiding costly repairs.
  • Quick and easy ground installation, requiring only basic manual tools and under 1 hour.
  • Built to last with automotive-grade stainless steel, ensuring durability and longevity.
What's in the box?
① 1* Cat Delete Pipe & 1* Muffler Delete Pipe
② 2* Bolt Sets
③ 3* Exhaust Band Clamps
Note
  • When installing, please prioritize safe work practices, including the proper use of jack stands or a lift, along with gloves, safety glasses, and other protective gear.
  • EngineGo high-performance exhaust modification products are designed for trucks with factory structures and original installation spaces. If your truck has been modified in any related area, additional adjustments may be necessary to ensure a proper fit and finish.
  • Consider using a lubricant, such as WD-40, to assist with the installation process.
  • Allow the truck’s exhaust system to cool down before starting to avoid burns.
Installation Process
  • Use an appropriate wrench to loosen the bolts and clamps on the emission control components. If rusted and difficult to remove, apply a lubricant to help loosen them. Remove sensors such as the oxygen sensor and temperature sensor (if present). Then Detach the emission control component.
  • EngineGo’s delete pipes are designed to be compatible with the factory exhaust system, so align the delete pipe with the original emission control component’s position and install it using bolts or clamps.
  • For added stability, a small tack weld on all clamp connections with a MIG welder is recommended. Ensure all connections are well-sealed, and check for exhaust leaks after starting the vehicle.
  • Removing DPF, CAT, and other emission control components typically requires a tuner to clear check engine lights or diagnostic trouble codes, and to adjust parameters such as the air-fuel ratio.

Off-road Use Only: EngineGo performance modification exhaust parts are designed for off-road use only. All vehicle modifications must adhere to federal, state, and local laws in the United States.

Professional Installation Advised: While EngineGo products are crafted to simplify performance modifications, given the theoretical and hands-on aspects involved, we recommend entrusting installation to individuals with professional expertise in modifications.

Trademark Ownership: All vehicle manufacturer, model, and engine names are trademarks of their respective companies, used here for identification only. EngineGo does not imply that its products are sponsored, authorized, approved by, or affiliated with any manufacturer shown.

Total {{ reviews.last_page }} Pages

Sitewide Product Reviews 310+ >

{{ faqs.from }}-{{ faqs.to }} of  {{ faqs.total }} {{ faqs.total > 1 ? 'Questions' : 'Question' }}
Helpful?

Total {{ faqs.last_page }} Pages

Please enter the following details before adding to cart.