2022-2024 Cummins EZ LYNK Custom AMDP Tuning Package | Full Support | Add Aisin Transmission Tuning

Professional Custom Tuning Support for Your 2022-2024 6.7L Cummins

Unlock the full potential of your 2022-2024 RAM 2500/3500/4500/5500 equipped with the 6.7L Cummins engine through our professional AMDP Custom Tuning Support Package. 

Developed by AMDP, Canada's leading diesel tuning specialists, this package provides access to professionally calibrated custom tuning files delivered through the EZ LYNK AutoAgent 3 platform. Whether you're looking for improved drivability, towing performance, or maximum off-road performance, you'll receive tuning designed specifically for your vehicle configuration.

⚠️ Important:

1. This package is a tuning support service only and does not include the EZ LYNK AutoAgent 3 hardware. Don't have an EZ LYNK device yet? → Shop EZ LYNK AutoAgent 3
2. An SGW Bypass Cable (for 2018+ RAM Trucks) is required for proper operation.

Available Power Levels

Actual performance may vary depending on vehicle condition, supporting modifications, fuel quality, and operating conditions.

Levels 4 and 5 deliver the highest horsepower and torque in this package, which pushes exhaust gas temperatures (EGT) noticeably higher under load. If you're running these upper levels, especially while towing or driving at high RPM, it's essential to monitor EGTs closely to help protect your turbo and engine from heat-related stress over time.

Why Choose This Package?

Transmission Tuning Available

Select the transmission matching your vehicle for enhanced shift points, firmer shifts, and reduced torque management, delivering smoother power and improved durability on 68RFE or Aisin-equipped trucks.

Built on the EZ LYNK Platform

This tuning package utilizes the EZ LYNK AutoAgent 3 platform, allowing calibration files to be delivered electronically without removing or shipping your ECM or TCM.

Once connected, the EZ LYNK system also provides:

• Wireless tune delivery
• Vehicle diagnostics
• Live data monitoring
• DTC reading and clearing
• Cloud-based tune management
• Convenient software updates

Choose Your Support Package

Select the support option that best fits your needs.

Limited Support

• Access to compatible tuning files for 4 weeks
• Tune installation support
• Calibration remains installed after support expires
• Ideal for customers who only need initial setup

Full Support

• Lifetime tuning support
• Unlimited tune revisions
• Ongoing calibration improvements
• Continued software update compatibility
• Long-term technical assistance

How to Install

1. Ensure you have all required items listed above before getting started.
2. Connect the security bypass cable as directed to bypass the factory Security Gateway Module (SGW) and enable reliable flashing.
3. Plug the EZ LYNK AutoAgent 3 into the vehicle's OBD port.
   Important: Connect a battery charger/maintainer to the truck. A 12+ amp charger is recommended to help prevent voltage drops during the flashing process, which could interrupt the flash.
4. Once the data transfer is complete, you are ready to flash your desired AMDP custom tune.

The flash will hang at 1% for about 30 seconds before continuing. Once it starts moving, the flash takes roughly 2 minutes. If it stalls at 1% and does not continue, just start the flash again. It will complete normally on the second attempt.