What Fails on the 6.7 Cummins Emissions System
These are the problems that send owners shopping.
- DPF loading and incomplete regenerations. Active regeneration injects extra fuel to raise exhaust temperature and burn off soot. Short trips and long idle periods do not give it the heat it needs, so the filter keeps loading.
- EGR cooler leaks. The cooler passes hot exhaust through a coolant-filled heat exchanger. Repeated heating and cooling can crack it, and coolant then reaches the exhaust or intake. That means white smoke, coolant loss, and in the worst case liquid in a cylinder.
- EGR carbon and intake deposits. Soot from the EGR system and oil vapor from crankcase ventilation end up in the same intake tract, where they form a heavy deposit that does not clear on its own.
- DEF and SCR faults (2013 and newer). The DEF pump, heater, quality sensor, and NOx sensors can all set faults, and the truck derates when they do.
See our guide to common 6.7 Cummins EGR problems for codes and symptoms.
Important: A delete is not a repair for a worn engine. Diagnose first. Coolant loss, blow-by, and oil consumption have causes that exhaust hardware does not fix.
What Your Truck Has by Model Year
| Model year |
Truck |
Emissions system |
Kit needs |
| 2007.5 to 2012 |
Ram 2500 and 3500 pickups |
EGR and DPF, no DEF |
EGR hardware, DPF pipe, tuner |
| 2013 to 2024 |
Ram 2500 and 3500 pickups |
EGR, DPF, and DEF with SCR |
EGR hardware, DPF pipe, tuner, DEF handling in the calibration |
| 2010 and newer |
Ram 3500, 4500, and 5500 Cab & Chassis |
DEF with SCR, introduced earlier than on the pickups |
Parts listed for Cab & Chassis |
Know your year, cab style, and body type before you buy. A kit listed for a 2010 pickup does not cover what a 2016 truck has, and a pickup kit does not fit a Cab & Chassis.
What a Complete Kit Includes
DPF Delete Pipe
The pipe replaces the factory particulate filter. EngineGo lists 4-inch and 5-inch options for this platform, with and without a muffler, and in turbo-back and downpipe-back versions. Check the listing for material, wall thickness, flange type, clamps, and hangers for your year.
EGR Delete Kit
The kit includes block-off plates for the EGR passages and hardware to cap the coolant ports so the cooler is no longer in the loop. Plate material is worth checking: look for machined plates with high-temperature gaskets and fittings rated for diesel coolant temperatures. Browse the 6.7 Cummins EGR delete kits to see what each version includes for your year and body style.
Tuner and Calibration
Hardware alone leaves the truck with fault codes and a derate. The ECM has to be reprogrammed to match the changes, and on 2013 and newer trucks that includes the DEF system's monitoring. Check whether the calibration comes with the kit or is sold separately, and what the tuner can write to on your specific ECM. Some later trucks need an unlock step first, so see our guide to 2019 Ram 6.7 Cummins ECM unlock and tuning and ask support for written confirmation before ordering.
Check the Transmission Before You Choose a Power Level
Most of the 6.7 Cummins pickups sold in these years use the 68RFE six-speed automatic. The Aisin AS69RC is paired with the high-output engine on some 2013 and newer Ram 3500 pickups and on Cab & Chassis trucks. Which transmission your truck has depends on the truck and engine rating, so confirm it before you plan anything.
When a tune raises torque, the transmission is working outside what it was built for, and the clutch packs and torque converter take the load first. The transmission control module also works from the torque the engine reports, so shift pressure and timing behave differently once the engine calibration changes. Transmission control is a separate item on this platform.
Talk to a transmission shop about what your transmission will hold at the power level you want, and put that cost in the budget at the start.
2019 and 2020 Trucks: Check the Fuel Pump Recall First
Ram 2500, 3500, 4500, and 5500 trucks from the 2019 and 2020 model years with the 6.7L Cummins came with the Bosch CP4.2 high-pressure fuel pump. NHTSA campaign 21V-880 covers about 222,410 of these trucks. The pump can shed metal into the fuel system and cause a stall, and the remedy replaces the pump and updates the engine software, free of charge.
Look up your VIN at nhtsa.gov/recalls and complete any open recall before you modify the truck. Whether a dealer will perform recall work on a truck with a modified calibration is the dealer's decision, so do not leave it for later.
What Fits and What Does Not
- Application: Ram 2500 and 3500 pickups with the 6.7L Cummins. Match the listing to your model year range.
- Cab & Chassis: Pickup kits do not fit Cab & Chassis trucks. The 3500, 4500, and 5500 Cab & Chassis trucks use their own EGR hardware and exhaust routing, so order parts listed for that configuration.
- High-output and 2019 and newer trucks: Confirm the tuner supports your ECM revision before you order. See our guide to the best 6.7 Cummins delete tuner options for 2013 to 2024 trucks.
Installation Notes and Safety
Check the installation difficulty on each product page. The pipe and EGR work is within reach for a confident DIY installer with basic hand tools and a lift or jack stands.
- Drain the coolant before disconnecting the cooler, and flush and bleed the system after reassembly.
- Clean the mating surfaces before the block-off plates go on.
- Disconnect the batteries before touching the emissions sensor wiring.
- Let the exhaust cool fully, and soak the exhaust fasteners with penetrating oil ahead of time.
- Use rated jack stands or a lift. Never work under a truck held up only by a jack.
- Wear safety glasses and heat-resistant gloves.
- Do not interrupt a flash once it starts. Keep a stable battery supply connected.
The Legal Status of a Delete
This decides whether a delete is an option for your truck at all.
Federal. Section 203(a)(3) of the Clean Air Act prohibits removing or disabling emissions controls on a certified motor vehicle and prohibits manufacturing, selling, or installing parts whose principal effect is to defeat them. An "off-road use only" label does not change how a certified highway vehicle is treated. Civil penalties are assessed per vehicle or per device and are adjusted for inflation each year.
California and adopting states. CARB requires an Executive Order for an add-on part that can affect emissions on an emissions-controlled highway vehicle. CARB's enforcement advisory states that a violation can occur regardless of what the seller or buyer says about intended use. California Smog Check has covered diesel vehicles since January 1, 2010.
Inspection programs. Many states run OBD-based inspections. A deleted truck typically cannot complete its readiness monitors, and a monitor that reports not ready is a rejection in most programs.
Enforcement posture. On January 21, 2026, the U.S. Department of Justice said it would no longer pursue criminal charges under the Clean Air Act for tampering with onboard diagnostic systems. The law did not change, and civil enforcement continues.
There may be a compliant path for power. Some emissions-intact calibrations carry CARB Executive Orders, which keep the DPF, EGR, and DEF systems in place and working. Check CARB's Executive Order listings for your exact model year before you decide. For more ways to improve towing and mpg, see our best 6.7 Cummins upgrades.
These products are intended only for off-road, race, or non-public-road use where permitted. Check federal, state, and local laws before purchase.
FAQs
Will a 6.7 Cummins delete affect my warranty?
Yes, it can. A dealer checks the ECM calibration before authorizing powertrain work, and a modified calibration gives the manufacturer grounds to deny a claim tied to the change. If you still carry factory or extended coverage, weigh that before you order.
Do I need a tuner if I only install the EGR kit?
Yes. Without a calibration, the ECM keeps commanding the EGR system and sets fault codes. A matching calibration is needed for a partial or full setup to run correctly.
What is the difference between a DPF-only pipe and a full kit?
A DPF pipe replaces the filter and still needs a calibration. A full kit adds the EGR hardware, and on 2013 and newer trucks the DEF handling too. Fewer separate purchases means fewer fitment gaps, so check the listing for exactly what is included.
Does the 6.7 Cummins need a 4-inch or 5-inch pipe?
Both are offered for this platform. Choose by the listing for your year and body style, and check wall thickness, flanges, and hangers rather than diameter alone.
Can I tune a 2022 or newer Ram?
Tuner support depends on the ECM in your truck. Ask for written confirmation that the tuner can write to your ECM revision before ordering.
How fast will an order ship?
Most orders are processed the same or next business day, excluding Sundays, unless otherwise stated. Most packages are delivered within 3 to 5 business days after leaving the warehouse, depending on package size, location, and carrier conditions. Free shipping applies to orders shipped within the continental United States.
What if I order the wrong part?
EngineGo accepts authorized returns within 45 calendar days from the date the product is received, unless otherwise specified. Returned items must be unused, uninstalled, unmodified, and in original condition with all included components. Tuner products and bundles that include a tuner may have stricter return limitations.
Find the Right Parts for Your 6.7 Cummins
Browse the 6.7 Cummins delete kits and check the Vehicle Fit Guide on each product page before checkout.
Not sure which setup fits? Send us your year, whether it is a pickup or a Cab & Chassis, transmission, current exhaust setup, any prior modifications, and how you use the truck. EngineGo support will help you confirm fitment before you order.